• New
Conversion Chain Driven Cam
search
  • Conversion Chain Driven Cam
  • Conversion Chain Driven Cam

Conversion Chain Driven Cam

€374.62
Tax included
Conversion for Twin Cam 1999–2006 (except Dyna 2006) to roller chains and hydraulic tensioners for increased durability. Profiles designed for stock lifters. Requires 2007–2017 cam plate, pump, gears, chains and tensioners (not included); parts list supplied. Made in the USA. Check compatibility and clearances at installation.
Quantity
Last items in stock

  Garanties sécurité

(à modifier dans le module "Réassurance")

  Politique de livraison

(à modifier dans le module "Réassurance")

  Politique retours

(à modifier dans le module "Réassurance")

  • Allows modernization of Twin Cam 1999–2006 engines (except 2006 Dyna Glide) by replacing timing chains with roller chains and substituting spring tensioners with hydraulic tensioners for increased durability.
  • The offered camshaft profiles are designed to work with stock lifters; installation also requires fitting a cam support plate, an oil pump, camshaft sprockets and chains, and the two hydraulic chain tensioners used on 2007–2017 models — these items are not included and must be purchased separately.
  • Each camshaft set comes with a list of components required for installation.
  • Expected performance is comparable to earlier models equipped with the same cam profiles.
  • Made in the USA.
  • Twin Cam 1999–2006 engines (except 2006 Dyna Glide) are not compatible with 2007–2017 camshafts, as the bearing journal diameter on the older engines is 0.875" while the 2007–2017 camshafts use a 1.000" journal. The "N" series retains the 0.875" journal while being compatible with the new cam support plate.
  • 1999–2001 model-year engines require the Andrews rear camshaft sprocket, while 2002–2006 models must use the original rear sprocket (OEM #25728-06).
  • The installer must check the spring seat as well as valve-to-valve and valve-to-piston clearances during installation.
ANDREWS
09250145
1 Item

Data sheet

Sommet de came d'admission
104°
Sommet de came d'échappement
108°
Soulèvement d'admission
0,510"
Soulèvement d'admission au point mort haut
0,184"
Soulèvement de l'échappement
0,510"
Soulèvement de l'échappement au point mort haut
0,168"
Temps d'ouverture d'admission
248°
Temps d'ouverture d'échappement
252°
Application
Échappement, Admission
Affûtage
Série 50
Fermeture de l'admission
48°
Fermeture de l'échappement
18°
Ouverture de l'admission
20°
Ouverture de l'échappement
54°
Marque
ANDREWS
Référence fournisseur
216850
Caractéristiques
peut être utilisé avec ressorts et poussoirs d'origine
Nom du produit
Kit arbre à cames
Type
Chaîne
Unités
Paire
Comments (0)
No customer reviews for the moment.