• New
Conversion Chain Driven Cam
search
  • Conversion Chain Driven Cam
  • Conversion Chain Driven Cam

Conversion Chain Driven Cam

€488.15
Tax included
Upgrade for Twin Cam 1999–2006 (except ’06 Dyna Glide) to roller chains with hydraulic tensioners. Made in USA. Compatible with stock lifter profiles. Plate, pump, sprockets, chains and the two ’07–’17 tensioners not included. ’99–’01: Andrews sprocket; ’02–’06: OEM 25728‑06. Bearing .875" vs 1.000" (Series N accepts the new plate). Installation: check stop and clearances.
Quantity

  Garanties sécurité

(à modifier dans le module "Réassurance")

  Politique de livraison

(à modifier dans le module "Réassurance")

  Politique retours

(à modifier dans le module "Réassurance")

  • Allows upgrading Twin Cam 1999–2006 engines (except 2006 Dyna Glide models) to roller timing chains by replacing spring tensioners with hydraulic tensioners to improve longevity.
  • The offered cam profiles are designed to be used with stock lifters; installation requires fitting a new cam support plate, an oil pump, sprockets and cam chains, as well as the two 2007–2017 model hydraulic chain tensioners.
  • Parts such as the cam plate, oil pump, sprockets, chains and 2007–2017 hydraulic tensioners are not included with the camshaft kit and must be purchased separately.
  • Each camshaft kit is supplied with a detailed list of required components for installation to help purchase any missing parts.
  • Expected performance is similar to earlier models equipped with the same cam profiles.
  • Made in the USA.
  • Twin Cam 1999–2006 engines (except 2006 Dyna Glide) cannot accept 2007–2017 camshafts directly because the bearing journal diameter of the older engines is 0.875" while the 2007–2017 camshafts are 1.000". The "N" series retains the 0.875" journal while being compatible with the new cam support plate.
  • For the timing drive: 1999–2001 model engines require the use of the Andrews rear cam sprocket, while 2002–2006 models must retain the original rear cam sprocket, OEM #25728-06.
  • The installer is responsible for checking the spring seat as well as the valve-to-valve and valve-to-piston clearances before and after installation.
ANDREWS
09250143
4 Items

Data sheet

Sommet de came d'admission
100°
Sommet de came d'échappement
106°
Soulèvement d'admission
0,510"
Soulèvement d'admission au point mort haut
0,174"
Soulèvement de l'échappement
0,510"
Soulèvement de l'échappement au point mort haut
0,148"
Temps d'ouverture d'admission
240°
Temps d'ouverture d'échappement
236°
Application
Échappement, Admission
Affûtage
37 Series
Fermeture de l'admission
48°
Fermeture de l'échappement
14°
Ouverture de l'admission
18°
Ouverture de l'échappement
46°
Marque
ANDREWS
Référence fournisseur
216837
Modèle
N Series
Nom du produit
Kit arbre à cames
Type
Conversion chaîne
Unités
Paire
Comments (0)
No customer reviews for the moment.