551G Gear Drive Camshaft Kit
search
  • 551G Gear Drive Camshaft Kit

551G Gear Drive Camshaft Kit

€1,117.58
Tax included
Gear-drive camshaft kit for 96–106 CID touring motorcycle engines (9.0:1 to 9.9:1 compression). Delivers stronger torque and power across the range, optimized for 1,000–4,000 rpm. Reverse-rotation rear cam; precise, chainless timing. Professional installation with machining; replace bearings and seals. Includes gears, bearings, seals, and instructions. Made in the USA. Not recommended for ≥10:1 compression; increased noise possible.
Quantity

  Garanties sécurité

(à modifier dans le module "Réassurance")

  Politique de livraison

(à modifier dans le module "Réassurance")

  Politique retours

(à modifier dans le module "Réassurance")

  • Compatible with 96 to 106 CID engines, for compression ratios from 9.0:1 to 9.9:1; bolt-in camshaft kit intended for stock or mildly modified Touring motorcycles
  • Reverse-rotation rear camshaft provides increased clearance to accommodate higher cam lifts
  • Delivers more power across the entire rpm range, with enhanced low- and mid-range torque; ideal operating range between 1,000 and 4,000 rpm
  • Improves valve timing accuracy by eliminating timing chain slack and the overly loose stock setup
  • Requires material removal on the inside surface of the OEM crankcase during installation
  • Requires a hydraulic press and other professional tools for proper installation
  • Cam bearings and seals must be replaced when installing new camshafts
  • S&S recommendation: use an adjustable pushrod kit
  • Not recommended for compression ratios of 10:1 or higher
  • Kit includes: inner and outer gears, inner and outer bearings, seals and gaskets, and installation instructions
  • Made in the USA
  • Installer must verify spring coil-bind height as well as valve-to-valve and valve-to-piston clearances
  • Due to the characteristics of gear-drive systems, increased valvetrain/timing noise may be observed
S&S CYCLE
09250959
6 Items

Data sheet

Marque
S&S CYCLE
S&S CYCLE
Référence fournisseur
106-4868
106-4868
Sommet de came d'admission
91°
Sommet de came d'échappement
102°
Soulèvement d'admission
0,550"
Soulèvement d'admission au point mort haut
0,178"
Soulèvement de l'échappement
0,550"
Soulèvement de l'échappement au point mort haut
0,170"
Temps d'ouverture d'admission
216°
Temps d'ouverture d'échappement
238°
Type
Pignon
Pignon
Unités
Kit
Kit
Application
Échappement, Admission
Nom du produit
Kit arbre à cames
Kit arbre à cames
Affûtage
Série 551
Fermeture de l'admission
19°
Fermeture de l'échappement
17°
Ouverture de l'admission
17°
Ouverture de l'échappement
41°
Comments (0)
No customer reviews for the moment.