• -10%
  • New
  • Out-of-Stock
Cansmart Gen II
search
  • Cansmart Gen II
  • Cansmart Gen II
  • Cansmart Gen II
  • Cansmart Gen II
  • Cansmart Gen II
  • Cansmart Gen II

Cansmart Gen II

€356.95
€321.26 Save 10%
Tax included
CANsmart™: plug-and-play module that manages your auxiliary lights (programmable high/low mode, two independent day/night presets, modulation/dimming, flash-to-pass, cancels with turn signal, inverts behavior with hazard lights, horn-linked strobe), Smart Brake activated on deceleration with 4 flashing modes, and a timed switched 12V accessory output (up to 30 s) for GPS, phone, or horn.
Quantity
Out-of-Stock

  Garanties sécurité

(à modifier dans le module "Réassurance")

  Politique de livraison

(à modifier dans le module "Réassurance")

  Politique retours

(à modifier dans le module "Réassurance")

  • High/Low Sync - Toggle auxiliary lights between high and low modes, programmable directly from the vehicle's factory stalk.
  • Independent ON/OFF control and dimming for two sets of lights (day/night), controllable via the vehicle's factory controls.
  • Light Modulation - Adjust the auxiliary lights' signature to improve your visibility to other road users.
  • Flash to Pass - To attract attention: operate the high beam switch three times and the auxiliary lights will perform three quick flashes.
  • Turn-signal Cancelation - The corresponding auxiliary light is automatically turned off when the turn signal is activated so as not to obscure the indicator.
  • Opposite Flashing with Hazard Lights - The auxiliary lights flash out of phase with the hazard lights for improved visibility during an emergency stop.
  • Plug & Play Horn Installation - Quickly plug in powerful horns, like our SoundBomb™, without the need for additional wiring harnesses or relays.
  • Horn Strobe - When you activate the factory horn or the SoundBomb™, the auxiliary lights automatically switch to strobe flashing.
  • Deceleration-responsive "Smart Brake" Technology - The CANsmart™ reads vehicle speed in real time and activates the auxiliary brake light during deceleration, even before the brake pedal is pressed; sensitivity and minimum speed are adjustable.
  • Flash Pattern Braking - The CANsmart™ offers four flashing modes to make the auxiliary brake lights more visible to following vehicles: flash only during hard braking, flash continuously while braking, or perform four rapid pulses then remain steady (compliant with California's legal flash rate).
  • Circuit Function Selector - The circuit function selector in the CANsmart™ software lets you assign any accessory to one of four circuits; click the circuit icon to open the dropdown menu and choose the desired function.
  • Switched Power - The CANsmart™ offers an "accessory" option that provides a switched, clean 12 V supply: any accessory connected to this circuit turns on and off with the ignition.
  • Timer - Accessories connected to this circuit can remain powered for up to 30 seconds after the vehicle is turned off.
  • On Board Power - The "accessory" circuit is ideal for powering a GPS, phone, heated gear, or any other onboard electronic device.
DENALI
20500539

Data sheet

Marque
DENALI
Référence fournisseur
DNL.WHS.25900
Caractéristiques
Plug-and-Play
Couleur/finition
Black
Nom du produit
Unité de commande de commutateur de guidon
Type
Feu stop, Feu de position, Clignotant
Unités
Pièce
Comments (0)
No customer reviews for the moment.