• -10%
Wire Harness CANsmart
search
  • Wire Harness CANsmart

Wire Harness CANsmart

€53.85
€48.46 Save 10%
Tax included
DENALI plug-and-play adapter to connect T3s to the GEN II CANsmart controller without modification. Powers up to 4 T3s (2 front / 2 rear) or only front or rear. If powered only by the CANsmart, the rear position (running) lights stay on between flashes; to turn them off, connect the red wires to a switched power source and set the stop to "brake." Not compatible with the KTM 790 Adventure.
Quantity
Last items in stock

  Garanties sécurité

(à modifier dans le module "Réassurance")

  Politique de livraison

(à modifier dans le module "Réassurance")

  Politique retours

(à modifier dans le module "Réassurance")

  • DENALI wiring adapter designed to connect T3 lights to the GEN II CANsmart controller, providing a simple and reliable plug-and-play connection.
  • Fully compatible with all DENALI CANsmart GEN II controllers: no modification or soldering required — direct plug-in to CANsmart circuits to pass commands to the T3 lights.
  • The harness is designed to power a set of four T3 lights (two rear and two front), and can also be configured to power only the front or only the rear depending on the desired installation.
  • Important: if the rear T3 lights are powered via this plug-and-play adapter from a CANsmart, the red position light remains illuminated between pulses of the amber turn signal.
  • This behavior is unavoidable when the T3s are powered solely by the CANsmart. To have the position light turn off during the amber flashing, connect the red wires of the T3 position lights to a vehicle-switched power source and set the CANsmart's brake light circuit to "brake only".
  • Compatibility note: not compatible with the KTM 790 Adventure model.
DENALI
20101551
2 Items

Data sheet

Marque
DENALI
Référence fournisseur
DNL.WHS.13400
Caractéristiques
Plug-and-Play
Nom du produit
Faisceau de câbles
Type
Clignotant
Unités
Pièce
Comments (0)
No customer reviews for the moment.